Structural Glazing is a brilliant & cost effective solution for contemporary glass design. Our company works with different types of glazing techniques:

Conventional system or capped curtain wall glazing.

Semi unitized system or open Groove and closed groove system.

Spider glazing system.

System reliability based on in-house factory production with specialized tooling and cutting machinery and installation taken care by trained qualified team members to ensure end user performance expectation are met with.

CAPPED CURTAINN WALL GLAZING

This is a conventional system of structural glazing consisting of glass that is bonded or anchored back to a structure without the use of continuously gasketed aluminium pressure plates or caps. This system is meant for construction of stick walls with capping.

A Semi Unitized glazing system is a type of a curtain wall which has combined aluminium mullion components of Curtain wall and Unitized Glazing. Its basic structural principle is to fabricate other curtain wall components with the exception of main keels, to assembly them into unitized panel, and then to deliver them to construction site for purpose of being fixed on main keels. Compared with regular structural member type glass curtain wall, semi unitized curtain wall has many predominant advantages in terms of bunch production, accuracy degree and quality for fabrication and installation, and repair and maintenance and after sales support.

Features of Glass Facade

Acts as Thermal Insulator.

Controls solar radiations.

Provides better safety and security.

Acts as a fire resistant.

Structural glazing systems, in their simplest form, are types of curtain wall systems consisting of glass that is bonded or anchored back to a structure without the use of continuously gasketed aluminium pressure plates or caps. The glass can be comprised of monolithic, laminated, dual-glazed or even triple-glazed insulating glass units (IGUs). The back-up structure may use horizontal and/or vertical aluminium mullions or be a glass mullion, steel blade, cable or stainless steel rod. The interior and exterior may use extruded silicone/EPDM gaskets, or a wet sealed silicone depending on the system. This system creates a completely clean, flush exterior.

Structurally glazed systems create a greater transparency than traditional captured systems. Sheets of toughened glass are assembled with special bolts and brackets and supported by a secondary structure, to create a near transparent façade or roof with flush external surface. There are less visual interruptions due to the lack of metal on the exterior creating a seamless, continuous glass look. Also there is less thermal bridging with structural glazing, saving on energy consumption costs.

Our company provides finest quality spider fittings, manufactured with high quality stainless steel. We provide variety of spider fittings manufactured with high quality standards. These fittings provide safety from air and water infiltration, also provide sound reduction.

Every spider fitting is customized as per the building specification and requirements of our clients.

Our extensive product and service proposition covers any frame less glass system in both domestic and commercial application. It varies from frame less shower panels and pool fences, stairwells to movable walls and commercial door entries. Frame less glass facades are also made for single height glass partitions with pivoted glass doors by using stainless steel patch fittings. Benefits of frame less glazing is that it provides optimum lights, also it gives an unobstructed view, gives a neat finish to the building construction, it creates frame less views to your external environment with absolutely no frame or fixing on show.

System SL 28/35 was developed considering the parameters of tropical climatic conditions and fulfilling the basic requirements of weather protection i.e. air infiltration and water penetration for the end user. The systems are based on International Standards and comply with the said specification.

Project based certification for all products used in the system and the overall system certification can be provided on request.

FEATURES :

System profiles are designed considering specified wind loads based on window layout, elevation details & location parameters to ensure structural performance requirements are taken care of based on  IS tropical codes. System designed for performance parameters on requirements of :

Water penetration control (200 – 250 Pascal).

Air permeability control (200 – 250 Pascal).

Structural stability performance of windows for high wind pressure (1.5 kpa to 3.5 kpa).

System designs formatted to ensure larger adaptability to varied cladding requirements based on thermal and acoustic performances cladding adaptability range from 5 mm to 24 mm.

System reliability based on in–house factory production with specialised tooling and cutting machinery and installation taken care by trained qualified team members to ensure end user performance expectations are met with.

SECTION DETAILS SL 35

DESCRIPTION:

01 – #8X60 LG. SS WOODEN SCREW

02 – RCC / BRICK WORK

03 – MARBLE

04 – WEATHER SILICON

05 – EXPANDABLE PU FORM

06 – HOLE CAP

07 – OUTER TRACK FRAME

08 – RAIL SECTION

09 – DUSTING PAD WOOL PILE

10 – ADJUSTABLE PULLEY

11 – SHUTTER FRAME

12 – SINGLE GLASS ADAPTOR

13 – EPDM GASKET

14 – GLASS

15 – DUSTING PAD

16 – SMALL INTERLOCK

17 – BIG INTERLOCK

18 – JUMBO INTERLOCK

19 – ANTILIFT CAP

20 – DRAINAGE CAP

21 – OUTER FRAME

22 – OUTER BEADING

23 – AC OUTER FRAME

24 – AC OUTER BEADING

Casement system was developed considering the parameters of tropical climatic conditions and fulfilling the basic requirements of weather protection i. e. air infiltration and water penetration for the end user. The systems are based on international standards and comply with the said specification.

Project based certification for all products used in the system and the overall system certification can be provided on request.

FEATURES

System profiles are designed considering specified wind loads based on window layout, elevation details & location parameters to ensure structural performance requirements are taken care of based on IS tropical codes. System designed for performance parameters on requirements of :

Water penetration control (300-600 Pascal).

Air permeability control (300-600 Pascal).

Structural stability performance of windows for high wind pressure (1.5 kpa to 3.5 kpa).

System designs formatted to ensure larger adaptability to varied cladding requirements based on thermal and acoustic performances cladding adaptability range from 5 mm to 39 mm.

System reliability based on in – house factory production with specialised tooling and cutting machinery and installation taken care by trained qualified team members to ensure end user performance expectations are met with.

Acoustic Insulation: Cold profiles ensure 30db sound reduction based on system design & high quality EPDM gaskets. Specialised application thermal break profiles & specified cladding details can ensure acoustic insulation up to 48db.

High security cladding and locking options available for specific requirements.

Windows provide light, fresh air and a view to our great outdoors, but they are a major source of unwanted heat in summer and heat loss in winter. Our energy efficient windows reduce the transfer of unwanted heat in summer and heat loss in winter. ARTE systems have the highest standard of sealing possible, to ensure effective solutions for water penetration and air and noise infiltration.

ARTE systems are indigenous designed systems wherein all products are designed as per end user requirements, by experienced qualified team members and procured from international suppliers, providing best of product quality and are experienced for decades in delivering products and services as per required norms and standards.